Phone: +41 (0) 61 836 15 30 info@avintos.ch
Finder Valve Configurator
Single-use Configurator
EN
Finder Valve Configurator Single-use Configurator
EN

avintos AG
Weidenweg 17
4310 Rheinfelden
Switzerland

Contact us
Tel:  +41 (0) 61 836 15 30
infoavintos.ch

Menu

Ball Valves

Back to the overview

PETER MEYER Ball Valve Type P

The standard PM ball valve is a 1-piece, laser-welded design in 1.4404. A direction-independent integrated pressure relief system, practically no dead space, fire safe as standard, an anti blow-out stem and a pre-loaded packing seal according to TA-Luft ensure the highest possible process reliability.

[Translate to English:] P/M
[Translate to English:] S
[Translate to English:] D
[Translate to English:] E

Technical Data :

Nominal sizes

DN 10 - 150

Pressure rating

PN 10 - 40

Temperature range

-60°C to +370°C

Connections

Flanges acc. to EN 1092-1
Butt welding ends acc. to EN 12627
Threaded ends internal in acc. to EN 10226-1
Threaded ends external in acc. to DIN ISO 228-1

Face to Face

Flanged in acc. to EN 558 and ANSI B16.10
Butt welding ends in acc. to EN 12982 R1
Threaded ends in acc. to DIN 3202 T4 M2

Documentation

DEFREN
Brochure
Data Sheet with Air Power actuator
Data Sheet with Norbro actuator
Operating Instructions
Declaration of Conformity PED DN32 - DN100
Declaration of Conformity PED DN150
Declaration of Conformity ATEX
Manufacturer's Declaration SIL
Certificate Fire-Safe
Certificate SVGW
Manufacturer's Declaration TA-Luft

Application

Chemical & Pharmaceutical
Food & Beverages
Energy & Environmental Technology
Biotechnology & Life Sciences
Water treatment
Request for quote
Contact us
Configurator

Integrated cavity pressure relief system

  • The system relieves the overpressure inside the ball (Pt) to the upstream pressure side P1 independent of the flow direction.
  • If the medium is able to freeze, the upstream pressure must be on spring side. The spring is always on the body welding side.
  • The chambered seats remain always in contact with the ball. The system is relieving over channels between seat and body (no abrasion or dirt in the sealing surface of the seat).
  • The system is suitable for liquid and gaseous media.
  • The system is also suitable for vacuum applications.